Lanzar-car-audio SDBT75NU Manuel d'utilisateur télécharger pdf (Page 8)

8

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota, follow

these mounting instructions.

Use the screw holes marked T (Toyota),

N (Nissan) located on both sides of the

unit to fasten the unit to the factory radio

mounting brackets supplied with your

vehicle.

To fasten the unit to the factory radio

mounting brackets.

1. Align the screw holes on the bracket

with the screw holes on the unit, and

then tighten the screws on each side.

2. Fasten with the supplied truss screws

(5x5mm) or flush surface screws

(4x5mm), depending on the shape of

the screw holes in the bracket.

Note:

(1) The outer trim ring, sleeve and the

metal strap are not used for method B

installation.

(2) When the unit is on work, if you release

the front panel, the unit will enter into the

power off state automatically, and you

can see the indicator LED flashing.

INSTALLATION

Dashboard or

Console

Side view showing

Screw Holes marked

T, N

Factory Radio

Mounting

Bracket

Screw

Screw

When you install the front panel the unit

will resume work automatically.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Commentaires sur ces manuels

Pas de commentaire